/**

* This file is part of Espruino, a JavaScript interpreter for Microcontrollers

*

* Copyright (C) 2013 Gordon Williams <gw@pur3.co.uk>

*

* This Source Code Form is subject to the terms of the Mozilla Public

* License, v. 2.0. If a copy of the MPL was not distributed with this

* file, You can obtain one at http://mozilla.org/MPL/2.0/.

*

* ----------------------------------------------------------------------------

* Espruino-specific changes to Nordic SDK-specific sdk_config.h files

* ----------------------------------------------------------------------------

*/

#include "platform_config.h"

// Board-specific changes

#ifdef NRF_USB

#define APP_USBD_CDC_ACM_ENABLED 1

#define APP_USBD_ENABLED 1

#define APP_USBD_VID 0x1915

#define APP_USBD_PID 0x520F

#define APP_USBD_DEVICE_VER_MAJOR 1

#define APP_USBD_DEVICE_VER_MINOR 0

#define APP_USBD_CONFIG_SELF_POWERED 1

#define APP_USBD_CONFIG_MAX_POWER 500

#define APP_USBD_CONFIG_POWER_EVENTS_PROCESS 1

#define APP_USBD_CONFIG_EVENT_QUEUE_ENABLE 1

#define APP_USBD_CONFIG_EVENT_QUEUE_SIZE 32

#define APP_USBD_CONFIG_SOF_HANDLING_MODE 1

#define APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE 0

#define APP_USBD_CONFIG_LOG_ENABLED 0

#define USBD_ENABLED 1

#define USBD_CONFIG_IRQ_PRIORITY 7

#define USBD_CONFIG_DMASCHEDULER_MODE 0

#define POWER_ENABLED 1

#define SYSTICK_ENABLED 1 // for USB errata

#define RNG_CONFIG_POOL_SIZE 64

#endif // NRF_USB

#define NFC_NDEF_MSG_ENABLED 1

#define NRFX_UARTE_ENABLED 0

#undef NRFX_UARTE0_ENABLED

#define NRFX_UARTE0_ENABLED 0

#undef NRFX_UARTE1_ENABLED

#define NRFX_UARTE1_ENABLED 0

#ifdef ESPR_USE_SPI3

#define NRFX_SPIM3_ENABLED 1

#endif // ESPR_USE_SPI3

#ifdef ESPR_BLUETOOTH_ANCS

#define BLE_ANCS_C_ENABLED 1

#define BLE_AMS_C_ENABLED 1

#define BLE_DB_DISCOVERY_ENABLED 1

#ifndef BLE_AMS_C_BLE_OBSERVER_PRIO // not part of normal SDK so not in sdk_config.h

#define BLE_AMS_C_BLE_OBSERVER_PRIO BLE_ANCS_C_BLE_OBSERVER_PRIO

#endif // BLE_AMS_C_BLE_OBSERVER_PRIO

#endif // ESPR_BLUETOOTH_ANCS

// Based on SDK12

#ifdef NRF5X_SDK_12

#define APP_FIFO_ENABLED 1

#define APP_TIMER_ENABLED 1

#define APP_UART_ENABLED 1

#ifndef NRF51_SERIES

// Do not include these for NRF51

#define BLE_HIDS_ENABLED 1

#define PEER_MANAGER_ENABLED 1

#endif // NRF51_SERIES

#define BLE_ADVERTISING_ENABLED 1

#define BLE_NUS_ENABLED 1

#define CLOCK_ENABLED 1

//#define CLOCK_CONFIG_IRQ_PRIORITY 6

#define CLOCK_CONFIG_LF_SRC 1

#define CLOCK_CONFIG_XTAL_FREQ 0

#define CRC16_ENABLED 1

#define ECC_ENABLED 1

#if defined(PEER_MANAGER_ENABLED) && (PEER_MANAGER_ENABLED==1)

#define FSTORAGE_ENABLED 1

#define FS_MAX_WRITE_SIZE_WORDS 1024

#define FS_OP_MAX_RETRIES 3

#define FS_QUEUE_SIZE 4

#define FDS_ENABLED 1

#define FDS_CHUNK_QUEUE_SIZE 8

#define FDS_MAX_USERS 8

#define FDS_OP_QUEUE_SIZE 4

#define FDS_VIRTUAL_PAGES 2

#define FDS_VIRTUAL_PAGE_SIZE 1024

#else

#define FDS_ENABLED 0

#define FSTORAGE_ENABLED 0

#endif

#define HARDFAULT_HANDLER_ENABLED 0

#define NFC_NDEF_MSG_ENABLED 1

#define NRF_QUEUE_ENABLED 1

#define GPIOTE_ENABLED 1

//#define GPIOTE_CONFIG_IRQ_PRIORITY 6

// Match platform_config - the default is 4 but on nRF52 we want 8

#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS EXTI_COUNT

#define PPI_ENABLED 1

#define RNG_ENABLED 1

#define SAADC_ENABLED 1

#if SPI_COUNT>0

#define SPI_ENABLED 1

#define SPI0_ENABLED 1

#define SPI0_USE_EASY_DMA 1

#else

#define SPI_ENABLED 0

#endif // SPI_COUNT

#if I2C_COUNT>0

#define TWI_ENABLED 1

#define TWI1_ENABLED 1

#define TWI1_USE_EASY_DMA 0

#else

#define TWI_ENABLED 0

#endif // I2C_COUNT

#if USART_COUNT>0

#define UART_ENABLED 1

#define UART_EASY_DMA_SUPPORT 0 // 1 in SDK15+

#define UART0_ENABLED 1

#define UART0_CONFIG_USE_EASY_DMA 0

#else

#define UART_ENABLED 0

#endif

#define I2S_ENABLED 1

#endif // NRF5X_SDK_12

// SDK15

#ifdef NRF52840

#define UART_ENABLED 1

#define UART_EASY_DMA_SUPPORT 1

#define UART0_ENABLED 1

#define UART0_CONFIG_USE_EASY_DMA 1

#define UART1_ENABLED 1

#define UART1_CONFIG_USE_EASY_DMA 1

// To allow advertising transmit via coded phy (connectable:true,scannable:false)

// #define NRF_SDH_BLE_GAP_EVENT_LENGTH 10

#endif // NRF52840

#if ESPR_LSE_ENABLE

#define NRF_SDH_CLOCK_LF_SRC 1 // 32.768 kHz crystal clock

// SoftDevice calibration timer interval.

#define NRF_SDH_CLOCK_LF_RC_CTIV 0

// SoftDevice calibration timer interval under constant temperature.

#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0

#define NRF_SDH_CLOCK_LF_ACCURACY NRF_CLOCK_LF_ACCURACY_20_PPM

#else // On internal oscillator

#define NRF_SDH_CLOCK_LF_ACCURACY NRF_CLOCK_LF_ACCURACY_500_PPM

#endif // ESPR_LSE_ENABLE

// Other SDK configs are still in sdk_config.h